|
|
|
![]() |
|
|||||||
|
||||||||
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Pits
Posted by CArobot at 2/7/2001 4:00 PM EST
Other on team #619, CArobot, from Charlottesville Albemarle. Does anyone know approx. how big the pits are at regionals? Does it vary from place to place? We are trying to make a banner but we don't know how big to make it. Thanks, CA Robot |
|
#2
|
|||
|
|||
|
Re: Pits
Posted by Brian at 2/7/2001 4:07 PM EST
Student on team #56, Robbe Xtreme, from Bound Brook High School and Ethicon Inc.. In Reply to: Pits Posted by CArobot on 2/7/2001 4:00 PM EST: Well the pit sizes depends on the Venue, but you should makeabouta five foot long baber by about 3 feet wide, If you are going to the NJ or PA regional, the pits tend to be rather small so a bigger banner will stick out more which will benefit your team... Brian |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Autonomous workking differently tethered in pits, than from feed during competition. | Elgin Clock | Programming | 12 | 24-03-2003 17:00 |
| Tables in pits? | Rickertsen2 | Regional Competitions | 2 | 23-03-2003 12:42 |
| Working in the pits | archiver | 2001 | 2 | 24-06-2002 03:28 |
| The best pits.... | archiver | 2000 | 6 | 23-06-2002 22:45 |
| Techno Tick Tow (Robot Tracter Pull in the Pits!!) | Matt Starkey | Off-Season Events | 11 | 01-05-2002 10:56 |