|
Re: How to wire a V7-2B17D8-048?
Quote:
Originally Posted by cyborgstx
We are have a hard time trying to wire up a limit switch and have no idea how to program it in JAVA.
|
Wiring is pretty simple, use a standard PWM cable and wire the negative and signal wires to the switch, using the common and NO or NC contact depending on how you want your switch to act (switch when opened, or switch when closed). The DSC has pull-up resistors therefor the positive PWM wire is not needed.
This should help you as well,
http://wpilib.screenstepslive.com/s/...ntrol-behavior
__________________
Driving "Career":
2012 GKC: Quarterfinals w/ 6th seeded alliance | Wisconsin: Quarterfinals - 3rd seeded alliance captains
2013 GKC: Quarterfinals w/ 5th seeded alliance | North Star: Regional winners, 2nd seeded alliance captains
2013 CMP: Curie Semis w/ 2056 + 3990
|
you must understand when wearing that FIRST Volunteer shirt, you personally & directly represent FIRST, and you do the best job for FIRST as an organization, that you can in performing that job....Period. - cglrcng [more] 
29-03-2014, 14:05
Linear Mode
