Go to Post You don't have to beat stronger teams to get better... to get better is to be forced to push the envelope against stronger teams. - Shankar M [more]
Home
Go Back   Chief Delphi > Technical > Control System > FRC Control System
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
Reply
Thread Tools Rating: Thread Rating: 3 votes, 5.00 average. Display Modes
  #1   Spotlight this post!  
Unread 10-01-2015, 14:20
GearTech GearTech is offline
Registered User
FRC #0108
 
Join Date: Dec 2013
Location: United States
Posts: 6
GearTech is an unknown quantity at this point
Exclamation RoboRIO imaging error

I've updated the 2015 Suite
I've also updated the firmware on the RoboRio
When I tried to re-Image it gives an error:
Quote:
Unable to configure the settings. Unable to comp!ete (not spelled incorrectly) operation because of unexpected error:
Property Node (arg 1) in
>RoboRIOImagingTool.lvlib:Config Settings.vi-
>RoboRIOImagingTool.lvlib:Reconfig Device.vi-
>RoboRIOImagingTool.lvlib:ImageManager.vi-
>RoboRIOImagingTool.lvlib:ImagingToolMain.vi
We have already tried to Turn it off and turn it back on.
Reply With Quote
  #2   Spotlight this post!  
Unread 10-01-2015, 14:44
duane's Avatar
duane duane is offline
Registered User
FRC #0701 (RoboVikes)
Team Role: Mentor
 
Join Date: Jan 2006
Rookie Year: 2003
Location: Vacaville
Posts: 90
duane is an unknown quantity at this point
Send a message via AIM to duane
Re: RoboRIO imaging error

We are having a similar problem. I have been unable to figure out how to factor reset the RoboRIO in order to start over.
__________________
Duane Murphy
Mentor - Software
Vanden Vikings FIRST Team 701
http://www.vandenrobotics.com
Reply With Quote
  #3   Spotlight this post!  
Unread 10-01-2015, 17:03
partounian's Avatar
partounian partounian is offline
Registered User
FRC #0599
Team Role: Programmer
 
Join Date: Jan 2013
Rookie Year: 2012
Location: United States
Posts: 5
partounian is an unknown quantity at this point
Re: RoboRIO imaging error

We've been having the same exact error, we've tried 3 different laptops (all W7). I've spoken with NI for a few days and after trying an insane amount of things, they ended up shipping another roboRIO but we're still having the same issue.

The order of installation attempted for the new clean roboRIO:
-Clean install of Labview
-Updated firmware
-Attempt to install (w/ and w/out safe mode) via USB as suggested.

Attempts to get connection over ethernet and wireless have always failed, but USB worked fine after one successful image on the old roboRIO (that was done by a friend's personal computer over ethernet).

We have tried:
-Changing IP settings
-Using MAX (unable to detect (old) roboRIO as remote system/haven't tried with the new roboRIO as no reason for it)
-Checked all connections/placement
-Direct connection to roboRIO
-Connection through router wired and wirelessly
-pinging through cmd has worked sometimes
-using Putty (not sure what we did with it)
Will post more attempts when they come to mind.

Last edited by partounian : 11-01-2015 at 01:14.
Reply With Quote
  #4   Spotlight this post!  
Unread 10-01-2015, 18:39
Mark McLeod's Avatar
Mark McLeod Mark McLeod is online now
Just Itinerant
AKA: Hey dad...Father...MARK
FRC #0358 (Robotic Eagles)
Team Role: Engineer
 
Join Date: Mar 2003
Rookie Year: 2002
Location: Hauppauge, Long Island, NY
Posts: 8,695
Mark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond repute
Re: RoboRIO imaging error

Did you try rebooting your PC that is doing the imaging?
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Reply With Quote
  #5   Spotlight this post!  
Unread 10-01-2015, 20:39
urg8rb8 urg8rb8 is offline
Registered User
FRC #0108
 
Join Date: Feb 2008
Rookie Year: 2007
Location: Plantation
Posts: 22
urg8rb8 is an unknown quantity at this point
Quote:
Originally Posted by Mark McLeod View Post
Did you try rebooting your PC that is doing the imaging?
I don't remember rebooting the PC. But we used a Windows 8 machine... do you see an issue with that?
Reply With Quote
  #6   Spotlight this post!  
Unread 10-01-2015, 21:54
Mark McLeod's Avatar
Mark McLeod Mark McLeod is online now
Just Itinerant
AKA: Hey dad...Father...MARK
FRC #0358 (Robotic Eagles)
Team Role: Engineer
 
Join Date: Mar 2003
Rookie Year: 2002
Location: Hauppauge, Long Island, NY
Posts: 8,695
Mark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond repute
Re: RoboRIO imaging error

Windows 8 & 8.1 were used by some of the Beta testing teams and should work fine.
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Reply With Quote
  #7   Spotlight this post!  
Unread 10-01-2015, 22:08
Greg McKaskle Greg McKaskle is offline
Registered User
FRC #2468 (Team NI & Appreciate)
 
Join Date: Apr 2008
Rookie Year: 2008
Location: Austin, TX
Posts: 4,748
Greg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond repute
Re: RoboRIO imaging error

These issues weren't encountered during the beta, so the support engineers are working through what may be going on and what may work to fix it.

At this point, there are two issues that they are worried about. If the power connector to the roboRIO were to be loose, the power may be lost during the imaging operation. That complicates the imaging process since it may now be necessary to go into safe mode.

The other issue seems to be related to timeouts during the imaging on some laptops. Please continue to work with the engineers so that we can get to the bottom of this.

Greg McKaskle
Reply With Quote
  #8   Spotlight this post!  
Unread 11-01-2015, 01:10
urg8rb8 urg8rb8 is offline
Registered User
FRC #0108
 
Join Date: Feb 2008
Rookie Year: 2007
Location: Plantation
Posts: 22
urg8rb8 is an unknown quantity at this point
Quote:
Originally Posted by Greg McKaskle View Post
These issues weren't encountered during the beta, so the support engineers are working through what may be going on and what may work to fix it.

At this point, there are two issues that they are worried about. If the power connector to the roboRIO were to be loose, the power may be lost during the imaging operation. That complicates the imaging process since it may now be necessary to go into safe mode.

The other issue seems to be related to timeouts during the imaging on some laptops. Please continue to work with the engineers so that we can get to the bottom of this.

Greg McKaskle
How do we contact the support engineers?
Reply With Quote
  #9   Spotlight this post!  
Unread 11-01-2015, 08:07
Greg McKaskle Greg McKaskle is offline
Registered User
FRC #2468 (Team NI & Appreciate)
 
Join Date: Apr 2008
Rookie Year: 2008
Location: Austin, TX
Posts: 4,748
Greg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond reputeGreg McKaskle has a reputation beyond repute
Re: RoboRIO imaging error

Quote:
How do we contact the support engineers?
Good question.

ni.com/frc is the primary landing page, but it is sort of busy.

The overview tab contains an FRC 2015 section on the left. It tells you different options for free support. The phone # listed is answered by the engineers.

The third tab leads to the online forums which are answered primarily by the support engineers.

Greg McKaskle
Reply With Quote
  #10   Spotlight this post!  
Unread 11-01-2015, 16:26
fovea1959's Avatar
fovea1959 fovea1959 is offline
Herder of programmers
AKA: Doug Wegscheid
FRC #3620 (The Average Joes)
Team Role: Mentor
 
Join Date: Jan 2011
Rookie Year: 2011
Location: St Joseph
Posts: 325
fovea1959 will become famous soon enough
Re: RoboRIO imaging error

I got hit with the same problem with a roboRIO and PC that had been imaged a couple of time with beta (roboRIO was not a beta one, was one of the AndyMark early deliveries).

What was different this time (besides the versions) was that I had the ethernet cable attached to the roboRIO and a radio (even though I was imaging over the USB). On a hunch, I disconnected the roboRIO from the Ethernet, cycled power on the Ethernet, and the reimage worked.

Don't know if it was coincidence, but if you have the roboRIO connected to the Ethernet, try disconnecting it while imaging.
Reply With Quote
  #11   Spotlight this post!  
Unread 11-01-2015, 16:52
urg8rb8 urg8rb8 is offline
Registered User
FRC #0108
 
Join Date: Feb 2008
Rookie Year: 2007
Location: Plantation
Posts: 22
urg8rb8 is an unknown quantity at this point
Quote:
Originally Posted by fovea1959 View Post
I got hit with the same problem with a roboRIO and PC that had been imaged a couple of time with beta (roboRIO was not a beta one, was one of the AndyMark early deliveries).

What was different this time (besides the versions) was that I had the ethernet cable attached to the roboRIO and a radio (even though I was imaging over the USB). On a hunch, I disconnected the roboRIO from the Ethernet, cycled power on the Ethernet, and the reimage worked.

Don't know if it was coincidence, but if you have the roboRIO connected to the Ethernet, try disconnecting it while imaging.
Hmmm thanks will give that a try! We had both Ethernet and USB cables plugged in simultaneously.
Reply With Quote
  #12   Spotlight this post!  
Unread 12-01-2015, 04:34
idooriane idooriane is offline
Electrical Head Team
FRC #1943 (NeatTeam)
Team Role: Electrical
 
Join Date: Jan 2013
Rookie Year: 2012
Location: Israel
Posts: 6
idooriane is an unknown quantity at this point
Re: RoboRIO imaging error

We had the same problem on Windows 8.1. So we try on other computer that runs Windows 7 and it works. So if you still have the problem try the solution we suggested it may works.
__________________
Ido Oriane

FRC #1943 NeatTeam (2012 - Present)
Electrical Head Team #1943 (2013 - Present)
Programming Team C++ #1943 (2012 - Present)
Media Head Team (2012 - Present)
Reply With Quote
  #13   Spotlight this post!  
Unread 15-01-2015, 00:29
mikets's Avatar
mikets mikets is offline
Software Engineer
FRC #0492 (Titan Robotics)
Team Role: Mentor
 
Join Date: Jan 2010
Rookie Year: 2008
Location: Bellevue, WA
Posts: 667
mikets is a glorious beacon of lightmikets is a glorious beacon of lightmikets is a glorious beacon of lightmikets is a glorious beacon of lightmikets is a glorious beacon of lightmikets is a glorious beacon of light
Re: RoboRIO imaging error

I have downloaded and installed the FRC2015 update but I can't find any icon or shortcut that leads me to the Imaging tool? I searched c:\Program Files, c:\Program Files (x86) but I can't find it. Where is it? BTW, we are using Java this year if it makes any difference.
__________________
Reply With Quote
  #14   Spotlight this post!  
Unread 15-01-2015, 00:39
mikets's Avatar
mikets mikets is offline
Software Engineer
FRC #0492 (Titan Robotics)
Team Role: Mentor
 
Join Date: Jan 2010
Rookie Year: 2008
Location: Bellevue, WA
Posts: 667
mikets is a glorious beacon of lightmikets is a glorious beacon of lightmikets is a glorious beacon of lightmikets is a glorious beacon of lightmikets is a glorious beacon of lightmikets is a glorious beacon of light
Re: RoboRIO imaging error

Never mind, I found it. It's in C:\Program Files (x86)\National Instruments\LabVIEW 2014\project\roboRIO Tool
__________________
Reply With Quote
  #15   Spotlight this post!  
Unread 16-01-2015, 10:07
partounian's Avatar
partounian partounian is offline
Registered User
FRC #0599
Team Role: Programmer
 
Join Date: Jan 2013
Rookie Year: 2012
Location: United States
Posts: 5
partounian is an unknown quantity at this point
Re: RoboRIO imaging error

I've managed to fix this error. The laptops I've attempted to use are school laptops and they did not have any connection successfully until now. (I've only attempted another student's personal laptop which worked successfully.) The school laptops were running Symantec protection and even if you disabled the settings, they actually wouldn't be disabled, even though they seemed to be.
FIX: I simply uninstalled the Symantec software and it works now.
Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 21:25.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi