|
|
|
 i wish ours was done so i could get some sleep - keagara [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| i wish ours was done so i could get some sleep - keagara [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
PDP giving faulty current readings
Let me start off by saying our PDP is running the latest firmware revision (1.4).
This is an image of a self-test showing all ports reporting 50+ amps under 0 load. https://fbcdn-sphotos-h-a.akamaihd.n...7ba0680656ad46 It would be extremely useful for us to accurately read current, so if anyone can tell us how to fix this it would be greatly appreciated. 
|
|
#2
02-03-2015, 06:48
|
|||
|
|||
|
Re: PDP giving faulty current readings
I would say you probably fix it by contacting support@crosstheroadelectronics.com for a replacement. The current sensors in your board are likely shot.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
