|
|
|
 Engineering is NOT manufacturing. .... It is good to be able to fabricate things with your own hands, but thats not what engineers do. - KenWittlief [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Engineering is NOT manufacturing. .... It is good to be able to fabricate things with your own hands, but thats not what engineers do. - KenWittlief [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
FRC 3824 triple six
|
|
#2
05-04-2015, 12:51
|
||||
|
||||
|
Re: FRC 3824 triple six
Congratulations on the second win and the triple stack!
The video feed wasn't clear, but it appears you made at least two changes since Palmetto. I think those spring clips for the totes were new. It also appeared that the totes slowed at the bottom of your ramp. Did you add powered rollers on the ramp? See you in St Louis... David
|
|
#3
05-04-2015, 13:12
|
||||
|
||||
|
Re: FRC 3824 triple six
We installed glass filled tubes on the forks to stiffen them up. Enables their bot to pick up a full load. Also printed new fingers to grasp the totes better. Finally have a roller to slow the tote as it leaves the ramp. Made a big difference. Drive team also spent a lot of time working on their timing.
We had an awesome finals. First match we had two full sixes destroyed by our third pick. Jinga on steroids! I'm hoping we have good video. It was spectacular! Had to score 151 to advance, got 152. Awesome nail biter.
|
|
#4
05-04-2015, 13:35
|
||||
|
||||
|
Re: FRC 3824 triple six
What an impressive robot and drive team. It was an honor (as always) to compete with your team at Smoky Mountains this year.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
