|
|
|
 Hey people, I found out the answer to my question and that one guy eric is right all you have to do is read the manual. The rules are in chapter 7.3.5.1, sections |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Hey people, I found out the answer to my question and that one guy eric is right all you have to do is read the manual. The rules are in chapter 7.3.5.1, sections |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
[FTC]: Cannot use Legacy (EV3) Sensors
Hello! I have been playing around with the software and sensor setup and was not able get legacy sensors to work!
I defined legacy touch sensor as TouchSensor and the phone was able to find the sensor, but it would always return true in isPressed() function. It would always return false if I unplug the sensor. Same story with the ultrasonic sensor... Values for distance fluctuate from 0 to 255 and only at times show right values. I almost gave up on trying to get this sensors to work... If I am doing something wrong, please let me know! Thanks!! 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode