|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Does this chassis look as if it would work?
A few other posts within this forum go into how Mecanum wheels would not be a good drive system type for this year's game. While we are considering pneumatic tires which are very likely to work, we are reluctant to lose the ability to strafe and quickly navigate the field. This is our current plan for our chassis which utilizes Mecanum wheels, and can be switched with the pneumatic tires at any time. This allows us to go to the competition with both sets of wheels and interchange them. The chassis has 6 inches of ground clearance. What is your opinion on the effectiveness of this chassis and drive system?
http://i.imgur.com/pJ9hPDj.png?1 ![]() |
|
#2
|
||||
|
||||
|
Re: Does this chassis look as if it would work?
I just want to bring attention to this portion right here. How much time do you think you would be saving by strafing through the field rather than turning and driving straight? I'm pretty sure that I've seen calculations that show that turning and driving straight is actually more efficient in terms of time.
|
|
#3
|
|||
|
|||
|
Re: Does this chassis look as if it would work?
I think it also depends on what type of game your playing. I find the mech wheels are good for helping to line up a shot. If your shooting it may help but otherwise I'm not so sure.
|
|
#4
|
||||
|
||||
|
Re: Does this chassis look as if it would work?
I'm amazed to find the number of teams currently posting that are seriously considering mecanum wheels for this year's game. As a potential competitor against your teams, I am delighted to know this. But as a teacher and coach, whose goal it is to inspire as many students as possible to succeed and enjoy competitions like FRC, I strongly advise you all to simply eliminate mecanum from your list of options, NOW. Please.
|
|
#5
|
|||
|
|||
|
Re: Does this chassis look as if it would work?
We were looking to shoot from the corner of the opposing teams courtyard, that way you don't line up a shot every time. Just go to the corner, slide in sideways, put the shooter at a prefigured angle, fire, and get out. With normal wheels you'd have to back into the corner while turning. Even then you can't guarantee a snug fit every time.
![]() |
|
#6
|
||||
|
||||
|
Re: Does this chassis look as if it would work?
Its always good to explain why, just so people dont have to ask "why would you say that?" and it takes more time to clarify.
|
|
#7
|
||||
|
||||
|
Re: Does this chassis look as if it would work?
Sigh. Okay. Because mecanum precludes you from crossing terrain, especially of the types which our robots must cross for this game. A mecanum drivebase will get stuck on the first obstacle.
|
|
#8
|
||||
|
||||
|
Re: Does this chassis look as if it would work?
Quote:
|
|
#9
|
||||
|
||||
|
Re: Does this chassis look as if it would work?
Quote:
I'm sure it can be done, but that looks to be about a 2 degree arc you need to be in and having been involved in building about 20 fields I can tell you that you cannot depend on that corner to be exactly square. |
|
#10
|
|||
|
|||
|
Re: Does this chassis look as if it would work?
Our robot design can go underneath the low bar, open the vertical gate, and can right the Cheval de Frise for crossing. Traction-wise and terrain-wise we we're skeptical about the Mecanum wheels due to reasons similar to those explained in this thread. We have both sets of wheels, so we'll just experiment with both and we can always go with the pneumatic tires.
Last edited by MSOSDev : 10-01-2016 at 11:48. |
|
#11
|
|||
|
|||
|
Re: Does this chassis look as if it would work?
The field wouldn't ever be non-square by more than 2 degrees though would it? Given the size of the field wouldn't that be noticeable?
|
|
#12
|
||||
|
||||
|
Re: Does this chassis look as if it would work?
Quote:
Mecanum - the biggest issue will be making sure the tabs don't get bent while crossing any of the platforms. It may be a good year to spend some weight on the Mecanum HD's from AM if you find the aluminum tabs bend or fatigue. |
|
#13
|
|||
|
|||
|
Re: Does this chassis look as if it would work?
Quote:
Mechanum wheels are bad for pushing, add weight for your climb, and are simply inappropriate for many of the obstacles. Worse yet they aren't even necessary for the action you illustrated. |
|
#14
|
||||
|
||||
|
Re: Does this chassis look as if it would work?
Quote:
I wish anyone who will be using mecanum wheels luck. I don't think the added benefit of strafing is worth the disadvantages, but I'm willing to be proven wrong. |
|
#15
|
|||
|
|||
|
Re: Does this chassis look as if it would work?
Could you explain what you mean by firing off the side? Do you mean against the castle walls or the guardrails? I feel like the majority of teams are going to insure their robot can adequately cross many, if not all of the obstacles. If we can be quick in shooting the ball and running back under the low bar to grab another one, and if we shoot extremely accurately. I see a very effective alliance and team strategy that could be put in place. As they damage defenses they feed balls into the courtyard, we can have them picked up and fired within 5-8 seconds.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|