|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
What are the specifications for this Window Motor?
http://i.imgur.com/723evwB.jpg
http://i.imgur.com/J60rWCI.jpg After researching as much as we could online, my team and I have come to the conclusion these two motors that came in the KOP are Denso Window Motors. Can someone please point us in the direction of their official product website so that we can find their specifications? We haven't been able to find a definitive location that gives us the information we're looking for. After searching through our KOP, none of us can find the electrical connectors for these motors either. Having their original website could help us find/utilize accessories for these motors specifically. We would like to use 1 or 2 of them for an arm mechanism that will always remain in a locked position when not powered, but we can't make any final design decisions until we know more about the motor. Thank you for the help! We're practically a rookie team and all the assistance we receive online helps us tremendously! |
|
#2
|
||||
|
||||
|
Re: What are the specifications for this Window Motor?
I don't know about the electrical side, but on the mechanical side FIRST's motor spec sheet should give you all the information you need.
|
|
#3
|
|||
|
|||
|
Re: What are the specifications for this Window Motor?
Edit: The info below is for old KOP motors, not the ones from this year. Didn't realize we got new ones - will have to look in the bin more carefully ...
I looked into these two years ago. Everything I found is summarized on this thread: http://www.chiefdelphi.com/forums/sh...d.php?t=125102 Andymark also has mounts for these motors (I have never tried them, but they look nice!) -matto- Last edited by aldaeron : 18-01-2016 at 11:10. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|