|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
FRCSIM Gazebo Model Problem
When using FRCSIM/Gazebo it works OK for a while, then the robot falls through the floor. Here is what I've been trying:
1) Download the 2016 world model for Gazebo from here: http://first.wpi.edu/FRC/roborio/rel.../frc2016.world 2) Installed/Configured FRCSIM and WPILIB Eclipse plugin per using the frcsim-installer.sh per wpi screensteps 3) Using the GearsBot sample code, I create a Java program and I am able to get the program running 4) I load up the frc2016.world file with frcsim and then I manually add the Gearsbot model to the world 5) After I drive it around successfully for a couple minutes the robot appears to drop through the floor, so only the top 1/2 of the robot is visible. 6) At this point there does not appear to be a way to use the robot, i need to delete it from the Gazebo world then re-insert a new Gearsbot model into the world. 7) I've attached a couple screenshots that show the before/after images. Success https://drive.google.com/file/d/0BxY...ew?usp=sharing Failure https://drive.google.com/file/d/0BxY...ew?usp=sharing Has anyone else been having this problem? Is it a problem with the frc2016.world file? Thanks -Gary |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|