Go to Post Pro safety tip: put a string through coil springs that is tied off securely on the robot frame. This will help prevent the spring from jumping out and killing an inspector if it snaps. - Ninja_Bait [more]
Home
Go Back   Chief Delphi > Technical > Programming
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Spotlight this post!  
Unread 16-02-2016, 10:59
Team4593 Team4593 is offline
Registered User
FRC #4593 (Rapid Acceleration)
Team Role: Mentor
 
Join Date: Jan 2016
Rookie Year: 2015
Location: Rapid City SD
Posts: 4
Team4593 is an unknown quantity at this point
CAN Not Found??

Hello,

First post here. I did a quick search and was unable to find anyone who posted about a similar problem. I am not positive if this an electrical or programming problem but I will post this here and see what happens.

We are having problems with our CAN signal. We are running 6 CIMs on 6 Talon SRXs. the problem is the Roborio is not identifying some of them. it is currently identifying 0,3,4 according to the rio website. This makes the robot pull one direction . When the breaker is on all of the Talons are flashing indicating they are receiving power. I have visually inspected all of the CAN wires and was unable to see any problems. I am unsure where to start to solve the problem. Any advice is greatly appreciated.
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 09:38.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi