|
|
|
 If I had come up with a chokehold strategy, I wouldn't talk about it on Chief Delphi. - Tom Bottiglieri [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| If I had come up with a chokehold strategy, I wouldn't talk about it on Chief Delphi. - Tom Bottiglieri [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Victor SP Wires
We got some new Victor SP motor controllers for our drive motors this year, but we noticed that it uses 12-gauge wire, while our CIM direct wires use 14-gauge. We found a connector that can connect up to 3 wires together that we can use, but our quick disconnects don't fit right on the SP wires and the CIM wires. Is there just a problem with our disconnects, or is there a better way to connect the wires together?
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode