|
Issues with grip on raspberry pi.
We are having difficulty with our vision system. We are using grip on the raspberry pi 2. We are using an axis camera. The camera and the pi are connected to a switch which is connected to port 802.3 on the router.
We have two issues:
1. We cannot communicate to the pi while on the field. It does work in the pit.
2. When we startup grip on the pi after boot up, we see a connection to the network table but the values do not update. We have to start grip numerous times before it starts to work. We think it is having difficulty connecting to the camera. We can see the stream from the camera before we starup grip on the pi.
Thanks
__________________
Derek Bessette
Team 4976 - GDHS Rebels
(Formerly Team 1114 and 3571)
|