|
Network Camera Connection Slowness
We just came back from our first competition, and one of our issues was how slow it took for the SmartDashboard to connect to the robot's network camera. (M1013, Around 3 minutes after robot powerup, ~1-2 min after field connection) This camera is only used for driver visibility, not targeting.
We also have a USB camera that worked almost instantly once the robot connected.
Any suggestions? (I just thought of static IPs, good defaults?)
Connection: Camera plugged into network jack in radio, using recommended mDNS names.
__________________
2016+ - Team 6013 Lead Engineer
2002-05 - Team 45 Software/Electrical
A robot is like a campfire: it takes a while to bulid it, and then everyone surounds it!
A world without standards is chaos. A world with standards is chaos.
Last edited by Steven Carmain : 04-04-2016 at 15:13.
Reason: Added comment about no code using camera
|
What really matters is what you got out of the FIRST season, and how you can use it to build on what you know.
- Adam Richards [more] 
Threaded Mode