|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||||
|
||||||
|
RoboCon 1.01 (control robot from PC)
It took some work and some massive amounts of Coke and Mountain Dew, but I just finished RoboCon, a program that will allow you to control a robot from your PC. There are two main components to RoboCon:
1. The DLL and LIB files. These can be included in your own programs to create a custom-control application specifically for your robot. Check out the "Writing your own..." document for more information 2. ConSample. A sample application that uses RoboCon. It is very minimal, but ConSample will allow you to control a robot using your PC. PLEASE read the README. It contains important information on how to make ConSample work. As always, my programs are available at: http://FIRSTprograms.tripod.com/Programs.htm -and- The whitepapers here Let me know what you think! --Rob |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| How much planning goes into your robot? | Jnadke | General Forum | 41 | 29-01-2006 21:29 |
| how do you power on the robot control | great_one411 | Electrical | 6 | 04-02-2003 00:46 |
| WASH Palm scouting at the Championship | Mike Soukup | Scouting | 2 | 19-04-2002 15:14 |
| robot control emulator for default or other program | CharlieWilken | Programming | 26 | 24-02-2002 02:36 |
| about how Drive Train push the robot... shouldn't the force accelerate the robot? | Ken Leung | Technical Discussion | 12 | 26-11-2001 09:39 |