3D Printable Mag Encoder Mount

[Sam Skoglund]

There is a lack of easy mounting solutions for mag encoders. Here is a system I designed to make this easier. I have included CAD files and picture. I hope teams will find this useful!

Talon SRX Mag Encoder Mount


Features:
- 2 3D printed parts
- Locks in place on end of .5" hex shaft with perfect alignment
- Total shaft space used = .738"
- Rotational stability via your own personally designed sheet metal mount bolted to housing hole(s)
- Other required parts:
- .5" Hex Bearing
- 2x .5" Hex Collars
- 2x .0625" .5" Hex Spacers

Let me know if you have any comments, questions, or concerns! Thanks!