pic: Ragnarok Teaser (701)

[niklas674]

loading photo ...

[flemdogmillion]

Did you build that entire sideplate from 1/4" milled aluminum?

[edesirim]

That whole side plate was milled out of 3/16" aluminum stock.

[Bruceb]

Originally Posted by edesirim

That whole side plate was milled out of 3/16" aluminum stock.

Dang looks really heavy

[D_Price]

Looking good can't wait to see the final product!

[Cothron Theiss]

Oh wow. When I first saw it, I thought it was plasma cut. What cutter were you using on the lettering? It looks like you didn't quite get all of the material.

[FRC6055]

Don't you love it when you try to post a simple teaser and everyone starts to pick you apart on little details!

It looks awesome and we look forward to what you come up with. If the robot turns out half as awesome as the name it will be great. You might even say it will be ...."end of all things!"

[edesirim]

Originally Posted by Bruceb

Dang looks really heavy

We're looking into that!

Originally Posted by FRC6055

Don't you love it when you try to post a simple teaser and everyone starts to pick you apart on little details!

It looks awesome and we look forward to what you come up with. If the robot turns out half as awesome as the name it will be great. You might even say it will be ...."end of all things!"

Thank you very much! We are super excited for what we have in store for the teams this year and can't wait to show it off at comp. As for the cutting, I believe the pocketing on the material did not go all the way through, but a little filing will do. Thanks for all the feedback and good luck to all the teams!

[niklas674]

Originally Posted by Cothron Theiss

Oh wow. When I first saw it, I thought it was plasma cut. What cutter were you using on the lettering? It looks like you didn't quite get all of the material.

We used an 1/8th inch carbide for the lettering. We still had a little bit of clean up to do after we took the picture.