|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
LED Strip Issues
We're trying to put LED strips on our robot to signal various things to the drivers, as well as improve the look of our robot. We're using this strip
https://www.adafruit.com/products/2440, with these MOSFETs on the signal wires: https://www.adafruit.com/product/355 We're trying to power it off of the roboRIO PWM outputs, but we're getting a weird issue where the LEDs are rapidly flashing at a lower-than-full brightness. My thought when this originally happened was that it was because our power ground wasn't connected to the signal ground (we're powering them directly from the VRM, while signal is from the roboRIO PWM pins), so we fixed that but they still don't work. |
|
#2
|
||||
|
||||
|
Re: LED Strip Issues
Quote:
|
|
#3
|
|||
|
|||
|
Re: LED Strip Issues
Yeah, we could run it off of the DIO pins, but we'd like to have more colors available than that.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|