|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Hi everyone
OK i decided to help out all teams with this problem... If you are using a drill motor and a CIM motor on both sides of your drive train with chains you probably noticed if you turn a 360 turn you will have your robot "bucking" to fix that you this equation for your power to your motors
power=10sinx+(average of power range) ex. (what we had to use) Power=10sinx+60 Last edited by SPDEXL : 17-02-2003 at 20:26. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|