|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Compressor Control
We are just now getting the pneumatics from 2003 out of the plastic bags and doing some experiments. I read last year that many people were reading the pressure switch state into the processor and then determining if the signal to the compressor via a spike should be on or off. Why can't you just wire the pressure switch in series with the power to the compressor and not even read the presuure switch?
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|