|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Confusion about the F-Ps
Quote:
The 2002 F-P was a high-output, high-speed (relatively speaking on both counts) Johnson Electric motor. The 2003 (and the 2001) was a lower-speed, lower-output Mabuchi. Now, in 2004, Paul Copioli has informed us that the motor is a high-output, lower-speed Johnson (which may or may not be reflected in the link to Johnson's site that I posted in the other thread). Yet, now, they are all fair game (that's three different models of motor). Personally, I don't have a problem with it, but it certainly is an uncharacteristic ruling--for example the 2002 CIM (the Atwood version) is specifically illegal, as ruled upon by FIRST, even though the FIRST version (introduced in 2003 and still present in 2004) is legal. More specifically: the 2002 motor is not a suitable spare for either of the others (unless used with its own gearbox--provided that year, and different from the current one), due to its higher free speed, and different gear size (yes, you can pull that off and replace it if you're determined enough). Last edited by Tristan Lall : 20-01-2004 at 11:15. |
|
#2
|
||||
|
||||
|
Re: Confusion about the F-Ps
I'm sure this is a mistake, and will likely be remedied very soon.
Good catch Tristan. |
|
#3
|
||||||
|
||||||
|
Re: Confusion about the F-Ps
Tristan,
Please see my post "Motor Specs - Part 2" regarding the F-P performance curve. I received the official curve from Johnson Electric this morning. I will e-mail FIRST immediately with my recommendation. To say the Johnson Electric motor from 2002 is legal will make my team go buy 10 from me local FP store, but I think the judgment is in error. -Paul |
|
#4
|
||||
|
||||
|
Re: Confusion about the F-Ps
Looks like it's all cleared up.
Quote:
|
|
#5
|
||||||
|
||||||
|
Re: Confusion about the F-Ps
Yesterday I e-mailed FIRST engineering the actual data sheet from this year and they have seen the differences.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| The 1 bin confusion..... | Rob Colatutto | Rules/Strategy | 62 | 09-01-2003 21:56 |
| Drawing Confusion | Gadget470 | OCCRA | 2 | 09-10-2002 13:25 |
| Scouting and Confusion Fix for Nationals | archiver | 2000 | 6 | 23-06-2002 23:20 |
| Additional Hardware list confusion | archiver | 2001 | 4 | 23-06-2002 22:29 |
| Potential confusion from this forum | Ken Leung | CD Forum Support | 7 | 31-05-2001 23:57 |