|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Drill Motor Top Rear Plastic Support
Well, we were mounting up our drill motors today and realized that FIRST gave us 4 top middle supports and zero top back supports instead of two top middle supports and two top rear supports. Did any one else get their kit this way? It is past the extended deadline of reporting this problem so we will be machining our own equivalents out of aluminum.
If any team did not receive these specific pieces and had planned on using them, send me a PM or post here and we'll see if we can run a couple for you. We are not machining aluminum replacements for people who got plastic ones. Perhaps for a cost we could make them for anyone but the intent of this was only wanted to ask if there's anyone we could help out who is in the same position as us. |
|
#2
|
|||
|
|||
|
Re: Drill Motor Top Rear Plastic Support
sanddrag - we (team 1259) have the center ones missing and have two extra back ones ..... do you want to exchange?
Sami Sami.Obaid@med.ge.com |
|
#3
|
|||
|
|||
|
Re: Drill Motor Top Rear Plastic Support
Quote:
|
|
#4
|
||||
|
||||
|
Re: Drill Motor Top Rear Plastic Support
We also had 4 rear plastic supports and no middle supports.
I can do a mail to for anyone who needs to swap with us. Thanks |
|
#5
|
|||
|
|||
|
Re: Drill Motor Top Rear Plastic Support
I just received ours from Paul Luffel of team 1127 Lotus Robotics. Thank You!. Can anyone tell me if the top rear supports this year are different from last year? The ones I received just have a slight arc on the bottom side of the top part of it. I remember there being a squared off cutout portion last year. They still work the same though right? Thanks.
|
|
#6
|
|||||
|
|||||
|
Re: Drill Motor Top Rear Plastic Support
the BEST thing to do about your problem is to follow Woody's kickoff lead...do exactly as he did with the BIG revolving light-toss it! LoL, is you need some supports contact me on aim: DavidButzin im from team 66 and i HIGHLY doubt we will be using our drill hearboxes this year
|
|
#7
|
|||
|
|||
|
Re: Drill Motor Top Rear Plastic Support
Quote:
|
|
#8
|
||||
|
||||
|
Re: Drill Motor Top Rear Plastic Support
Quote:
Tom Saxton Issaquah High Robotics Team 1318 |
|
#9
|
|||||
|
|||||
|
Re: Drill Motor Top Rear Plastic Support
We also need some middles, I believe we have extra rear supports too, let me know if you are willing to swap...
|
|
#10
|
|||||
|
|||||
|
Re: Drill Motor Top Rear Plastic Support
When we were mounting our drills last night, we realized the same thing - 4 rears and no middles. PM or e-mail me about a trade for 2 middles for 2 of our rears and I'll see what we can do.
Kev |
|
#11
|
|||
|
|||
|
Re: Drill Motor Top Rear Plastic Support
hi we at team 665 also has 2 rear mounts for the drill motors. i was wondering if any team would like to swap for two center pieces. that would be great. thanks
|
|
#12
|
|||
|
|||
|
Re: Drill Motor Top Rear Plastic Support
if anyone would like to trade 2 rear motor mounts for two middle pieces can u like reach us somehow. we really need the two middle parts. thanks
|
|
#13
|
||||
|
||||
|
Re: Drill Motor Top Rear Plastic Support
Quote:
Thanks, |
|
#14
|
||||
|
||||
|
Re: Drill Motor Top Rear Plastic Support
Quote:
Our team e-mail address is team1425@wilsonvillerobotics.com for anyone who wants to exchange.Last edited by sygterm : 06-02-2004 at 19:16. |
|
#15
|
||||
|
||||
|
Re: Drill Motor Top Rear Plastic Support
Quote:
We got 4x top front supports, 2x top back supports, 0x top middle supports We have last year's, though. We will trade them for your skyway wheels (just kidding! but, if you are willing to negotiate, we would like the wheels!) |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Portable cordless drill press | Gui Cavalcanti | Technical Discussion | 25 | 03-08-2003 22:21 |
| drill motor mounts- again | Jeff Sharpe | Motors | 6 | 07-04-2003 23:20 |
| plastic hubs and drill motors | Will Camisa | General Forum | 4 | 01-03-2003 00:03 |