will your team use bumpers this year?

Alex Cormier · #1 29-01-2004, 21:45

will there be bumpers on your robot this year?, were they on last year?

Mark Pettit · #2 29-01-2004, 22:06

Bumpers?

Team #991's Uncomfortable Hunk of Metal is a good argument for bumpers for the rest of you. You don't want to mess with this! We enjoy altercations in the arena. The scratches and dings make our tough robot look mean!

http://www.brophyrobotics.com

Aignam · #3 30-01-2004, 00:14

Team 25 will be using diamond plate bumpers similar to those used last year.

srjjs · #4 30-01-2004, 02:15

I don't think that would qualify as a bumper. Diamond plate is not soft.

Aignam · #5 30-01-2004, 05:41

Sorry, then, it will be Diamond Plate that does not reach outside the permitted robot specifications, and thus, not bumpers. (But they're really just bumpers.)

Solace · #6 30-01-2004, 10:10

Quote:

Originally Posted by Aignam

Sorry, then, it will be Diamond Plate that does not reach outside the permitted robot specifications, and thus, not bumpers. (But they're really just bumpers.)

soft, external bumpers would interfere with our autonomous mode.

KenWittlief · #7 30-01-2004, 10:29

every bot will have bumpers - the real question is: are your bumpers something you designed to BE bumpers, or is something gonna end up filling that function that you didnt intend to?

A. your frame
B. your wheels! (OUCH!)
C. your arm
D. your ball collection mechanism
E. your Robot Controller
F. your battery! (if your bot tips over, whats gonna get bashed on your soft underbelly?????)

sanddrag · #8 30-01-2004, 15:31

Quote:

Originally Posted by KenWittlief

E. your Robot Controller

We did that last year in testing (by accident of course). We didn't realize that the radio cable plug was sticking out in front of the robot a little and we drive right into a pole right on that plug. (Out of a 36" wide frame, going into a 4" diameter round pole, what are the chances you'd hit the 1.5" wide plug sticking out!?!?) Anyway, it broke off our radio port kind of. It still worked but we were skeptical. Luckily my brother is an electronics expert and he was able to open it up and install a new port.

View Poll Results: bumpers!
yes this year we will have them, we didnt have them last year	3	10.34%
this year we will have them and last year we had bumpers	8	27.59%
bumpers?	9	31.03%
we had them last year but not this year	1	3.45%
last minute buy down at the store	3	10.34%
if notcing bumpers are major at a competition we most likely will go get some	5	17.24%
Voters: 29. You may not vote on this poll

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The Death of FIRST	Anton Abaya	General Forum	23	03-05-2006 17:18
The 2003 Index of team's post about their robot...	Ken Leung	Robot Showcase	4	28-02-2003 00:18
More 'Best' Robots (a well thought list)	archiver	2000	2	23-06-2002 23:11
Disqualifications	archiver	1999	13	23-06-2002 21:53