|
|
|
 We didn't need a championship to recognize the kids on our [little league] team and we sure didn't need one to inspire them. If you want to go to the championships then work harder, don't try and lessen the value of the championships by letting everyone in. - FarmerJohn [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Using two spikes for one motor
We were wondering if we can place two spikes for one motor. We are out of victors, so we were wondering if we could somehow use one spike for forward, and another for reverse (using the same motor for both directions).
Thanks for any/all help! |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Thermal Protection | archiver | 2000 | 1 | 06-23-2002 11:27 PM |
| Window motor tape | archiver | 1999 | 4 | 06-23-2002 10:04 PM |
| Gear/Sprocket Help | Joseph F | Motors | 3 | 03-18-2002 07:48 AM |
| "Motors and Drive train edition" of Fresh From the Forum | Ken Leung | CD Forum Support | 6 | 01-29-2002 12:32 PM |
| Drill Motor and FP Motor Shaft Diameters | Andy Baker | Motors | 4 | 06-11-2001 08:12 PM |
Threaded Mode