|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Camera Vision Range
Hi,
I was wondering about the range that the camera can detect the Vision Tetra, so i know if the robot has to move forward before you can scan for it. Thanks for your time. |
|
#2
|
|||||
|
|||||
|
Re: Camera Vision Range
If you are just going for the ones on your side you should not have to move forward at all. If you want to go for one on the opposite end of the field (the other teams vision tetras) you might have to go forward.
|
|
#3
|
|||
|
|||
|
Re: Camera Vision Range
We've had some problem with that too.. There's actually a lot of scenarios that come with the camera.. Anywyays... if you look at the layout of where the tetras can be, there's no guarantee that one is going to be on the left side and the other is going to be on the right... which makes it a bit difficult, since the vision camera has a bit of a narrow view.. =/
Last edited by aziandorkess : 03-02-2005 at 00:56. |
|
#4
|
|||||
|
|||||
|
Re: Camera Vision Range
We can easily track a vision tetra target more than 30 feet away. If it's placed in a well-lit spot, a three-foot yellow triangle on the floor 40 feet away is still detected. Distance shouldn't be a problem.
|
|
#5
|
||||
|
||||
|
Re: Camera Vision Range
Quote:
your the only one to understand my question Thanks ![]() |
|
#6
|
||||
|
||||
|
Re: Camera Vision Range
We were trying out our camera but we could only see it when it was 5 feet away.
Do u know what we could be doing wrong |
|
#7
|
|||||
|
|||||
|
Re: Camera Vision Range
I would be willing to bet (actually I wouldnt as the cameras seem to have a lot of problems, but you know what I mean) that your problem is lighting. The cameras are incredibly sensitive to it.
|
|
#8
|
|||||
|
|||||
|
Re: Camera Vision Range
Quote:
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Scripting Setup and the Camera + Serial Port Drivers | CJO | Programming | 22 | 11-01-2006 17:42 |
| Unresponsive camera | neilsonster | Programming | 9 | 17-02-2005 08:51 |
| Camera Range Finding | russell | Programming | 9 | 31-01-2005 19:54 |
| Is the suggested Vision Camera setup ILLEGAL?! | Mr. Lim | Rules/Strategy | 37 | 20-01-2005 21:46 |
| CMUCam2 Camera Code - Are important parts commented out? | Mr. Lim | Programming | 4 | 14-01-2005 12:11 |