|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||||
|
|||||
|
pic: (447) Innovation Break
|
|
#2
|
|||
|
|||
|
Re: pic: (447) Innovation Break
Yes, our breaker panel bottom is falling off too. It's annoying for sure...
|
|
#3
|
||||
|
||||
|
Re: pic: (447) Innovation Break
While i have heard of some of the spikes casings coming loose this year i have yet to hear about the breaker panels opening up. Since you seem to have both of these issues present it leads me to believe this may have occurred due to your use. Have you been testing these pieces of equipment under heavy loads. I mean have you had these units on a test bed robot where it was being tested and maybe hit by another robot or was ramming an object. If you haven't I'm wondering if the box they were delivered in from your kit pick up location was ever dropped or the individual components dropped. Since all IFI equipment was delivered in an electronics box together, check your other Spikes, Victors and OI & RC to see if those casings may be loose or separated also. Just watch out what you may use to reconnect the cases together as they are made from a molded thermoplastic and some glues and adhesives (like loctite for example) will eat the plastic and damage the products beyond repair.
|
|
#4
|
|||
|
|||
|
Re: pic: (447) Innovation Break
ya ours started to come off. but i hink the 4 plastic washers that come with the panel are supposed to keep it together
|
|
#5
|
|||
|
|||
|
Re: pic: (447) Innovation Break
Nope, ours has been in storage up until recently - we haven't even dropped it yet!
|
|
#6
|
||||
|
||||
|
Re: pic: (447) Innovation Break
Quote:
|
|
#7
|
||||
|
||||
|
Re: pic: (447) Innovation Break
ya, ours is comming off.
|
|
#8
|
|||
|
|||
|
Re: pic: (447) Innovation Break
Next question - if anyone has had the back come completely off, is there anything important on the back? Should we worry?
|
|
#9
|
||||
|
||||
|
Re: pic: (447) Innovation Break
We mounted ours very early so we did not encounter that problem, however we did have one speed controller die, that was annoying!
|
|
#10
|
|||
|
|||
|
Re: pic: (447) Innovation Break
Quote:
Don't know about the new spike casings, havent taken one of those apart yet. |
|
#11
|
||||
|
||||
|
Re: pic: (447) Innovation Break
We've had no problems with ours. Like Rickertsen2 implied earlier, it's most likely student/mentor error that caused your problem, not an IFI defect.
|
|
#12
|
|||||
|
|||||
|
Re: pic: (447) Innovation Break
Quote:
I think IFI provides us with a great set of tools to quickly and easily develop a very powerful robotics control system. The RC, OI, Victor, Radio Modems and Spike are great components. Sure, they are expensive. We can only speculate why parts from IFI are so expensive. Whether it be limited production quantities, big discounts to FIRST, labor costs or a mix of a number of reasons. These components are pricey but most seem like it's money well spent for quality components. Frankly, I'm not as satisfied with the Breaker Panel as the other components. We ordered an extra Breaker Panel and we see the same problem with both. Unless they are securely mounted the cover wants to come off. Who knows why that is- it might be that FIRST asked for these to be developed in December. You just don't know. I just hope that next year they implement a better system to protect the PCB and electronics on the Breaker Panel. |
|
#13
|
||||
|
||||
|
Re: pic: (447) Innovation Break
Quote:
|
|
#14
|
||||
|
||||
|
Re: pic: (447) Innovation Break
Team 121 has managed to break or destroy multiple kit components this year, but everything provided by IFI has been great. It is possible that some components may have been damaged in shipping or by rough handling. If you are careful with the components and mount them properly then you shouldn't have any problems. If a component arrived broken then it was probably damaged in shipping.
I think that IFI has done a great job creating components to better suit the needs of FIRST teams. You should see some of the electrical shennanigans that took place before IFI started providing components! We should really be greatful about what we are given in the kit. The quality and easy implementation allows more energy to be focused on creating a competitive machine, not just getting one running. Rob Last edited by Rob : 10-02-2005 at 17:26. Reason: typos |
|
#15
|
|||||
|
|||||
|
Re: pic: (447) Innovation Break
Don't get me wrong, I'm not saying I'm not grateful of what IFI gives us.
I just remember the glory days of the old screwed together spikes that never, never came apart and rarely ever had to be replaced.These parts have been through two boards and regular robot use that can be expected during competition. P/N SPIKE-RELAY-H $34.95 P/N: BREAKER-PANEL $84.95 P/N VICTOR-884-12 $114.95 I just dint like this new design, the roundedness, all the glue, one screw on the whole breaker panel. I just want throw back spikes man Well I am kind of biting the hand that feeds me. I love you IFI! Just trying to raise a valid criticism to better the kit for next years bunch. ![]() |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| pic: (447) Chassis Weight + Appendages | rufu5 | Robot Showcase | 6 | 09-02-2005 17:55 |
| pic: 447 Teaser | rufu5 | Extra Discussion | 7 | 30-01-2005 09:47 |
| pic: (447) Our CMU CAM BOX | rufu5 | Extra Discussion | 2 | 17-01-2005 19:10 |
| pic: 33 / 447 | CD47-Bot | Extra Discussion | 1 | 11-07-2004 14:31 |
| pic: Sleepy 447 | CD47-Bot | Chit-Chat | 4 | 23-05-2004 21:31 |