|
|
|
 Theory is when you know everything but nothing works. Practice is when everything works but you don't know why. On our team, theory and practice comes together. Nothing works and nobody knows why. - CalTran [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Gunk in solenoid
today we were practicing and then all of a sudden our pneumatic cylinder got stuck goin out and would not go back in
we were really confused and after test many possiblities found out that there was somethin wrong with the solenoid We then took the solenoid completely apart and found that the rod inside the solenoid was covered in gunk after we cleaned it off and put everything back together it all worked perfectly just as it was before is that gunk a normal thing? is there a way to make sure it doesnt happen again? |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Single vs double solenoid valve operation | Scott358 | Pneumatics | 0 | 29-01-2005 11:47 |
| Creating no pressure with double solenoid? | Combat Chuck | Pneumatics | 7 | 29-02-2004 22:45 |
| using single solenoid like a double | SteveO | Programming | 14 | 02-02-2004 22:51 |
| Fresno solenoid.... | mike325 | Technical Discussion | 3 | 11-02-2003 07:50 |
| Will trade for double solenoid valve | archiver | 2001 | 2 | 24-06-2002 00:33 |
Threaded Mode