|
|
|
 So basically, the advantage of #35 is that it allows you to be sloppier in your design and fabrication. If you pay close attention to these details, you will never have a problem with #25 chain. - Jim Zondag [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Camera Calibration
I have been looking over the CMUCam2 Workbook and I have a question about calibrating the camera. The manual makes it seem like you only have to calibrate the camera for the YCrCb color space if you can not properly calibrate it for the RGB color space. Is this correct? If it is necessary to calibrate the camera for only one color space, which color space seems to be more accurate? Finally, how much tweaking needs to be done to get the camera to recognize the target in different lighting?
Thanks for any input you can provide. |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| How To Use the Google Camera | generalbrando | Kit & Additional Hardware | 2 | 07-02-2006 16:00 |
| Scripting Setup and the Camera + Serial Port Drivers | CJO | Programming | 22 | 11-01-2006 17:42 |
| Camera DB9 / Calibration Port | roboticsguy1988 | Programming | 10 | 26-01-2005 14:15 |
| Game Field Camera Calibration | Matthew_H | Regional Competitions | 2 | 15-01-2005 23:09 |
| CMUCam2 Camera Code - Are important parts commented out? | Mr. Lim | Programming | 4 | 14-01-2005 12:11 |
Hybrid Mode
