|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||||
|
|||||
|
How about a REAL teaser? This one will keep you guessing...
Dave posted some teasers, and I just couldn't let them get TOO much attention! Sorry guys
![]() ![]() |
|
#2
|
|||
|
|||
|
Re: How about a REAL teaser? This one will keep you guessing...
Hrrm. Even I'm not sure why there are so many gears. It doesn't quite add up to me. I can add up the plates to logic, but not the gears. I guess I'll find out soon enough.
Wait a minute. All those plates are purely cutouts almost. So much space, but no bores??? Okay, you're really done it now Travis. I've even seen the early stages of your work and I'm still completely lost. In any case, ours will be smaller and lighter. I know I've got you beat on that. Anybody want to count up the teeth on those gears. They're huge. ![]() |
|
#3
|
|||||
|
|||||
|
Re: How about a REAL teaser? This one will keep you guessing...
It obvious to me based on the number of parts. Travis figured out a 2-speed shift on the fly swerve/crab drive.
|
|
#4
|
||||||
|
||||||
|
Re: How about a REAL teaser? This one will keep you guessing...
Top pictures are gears with dog shifters. I don't know why the dog gears don't have hex or square holes in them, but that is a detail that may not matter.
The big question is... why post these pics together? Two thoughts: 1. The large gears are for a single stage, 2 speed shifter gearbox. The plates are for the shooter. That is ok, but it is not likely that 968 would post these pictures together if they are from different systems. These guys have more up their sleeves. 2. The gears and the plates go together to make a 2 speed, shift-on-the-fly shooter. This is to optimize acceleration. They can start their flywheel in low gear, get up to a good rpm and then shift to high gear. With this shifter, they will be spinning at top speed faster than their opponents. Very nice. Wow... good idea. If anyone else would want to make a shift-on-the-fly 2 speed wheel spinner, I wonder where they could buy hardware for this? Hmmm... Good luck to 968 with this great design. Andy B. |
|
#5
|
|||||
|
|||||
|
Re: How about a REAL teaser? This one will keep you guessing...
Originally that's what I thought Andy then the number of parts caught my eye. Why would they make 5 shooters. Then I noticed what appears to be a CIM mouning pattern on the assembly which changed my size assumptions of these parts.
I guess we won't know for sure until closer to ship ![]() |
|
#6
|
||||||
|
||||||
|
Re: How about a REAL teaser? This one will keep you guessing...
ok here is my guess. I think that they are doing 4 drive modules on their bot. The circular plate is the wheel mount/protector. They are showing us the sets for their real robot and practice bot.
|
|
#7
|
||||
|
||||
|
Re: How about a REAL teaser? This one will keep you guessing...
Each one of those columns of gear has 4 gears and two dogs... this reminds me of a four speed shift on the fly transmission (think double woburn) that we have in our "If we had more money" engineering notebook. So, maybe a four speed holonomic? Or, if some are for shooters, then maybe they're going to have two parallel pickup/shooting systems.
|
|
#8
|
||||
|
||||
|
Re: How about a REAL teaser? This one will keep you guessing...
Quote:
Also, Travis has used a 4-speed transmission the past two seasons, and I wouldn't be surprised if they were using another one this year. -Bill |
|
#9
|
|||
|
|||
|
Re: How about a REAL teaser? This one will keep you guessing...
It looks like something for the shooter. It could also be for the harvester o.o
|
|
#10
|
||||
|
||||
|
Re: How about a REAL teaser? This one will keep you guessing...
Looks intimidating. Possibly a single wheel shooter?
But if it was single wheel, why would you need so many gears, unless it was supposed to be a turret. |
|
#11
|
||||
|
||||
|
Re: How about a REAL teaser? This one will keep you guessing...
Isn't it obvious?
It's a 32 speed transmisson. |
|
#12
|
|||
|
|||
|
Re: How about a REAL teaser? This one will keep you guessing...
The first row of sprockets have 56 teeth
The second row also has 56 teeth The third row has 81 teeth The forth row i counted 92 teeth but thats inaccurate because the picture started to blur in the back round. MAN, my brain hurts. I never thought I could squint and count small teeth on a computer monitor. |
|
#13
|
||||
|
||||
|
Re: How about a REAL teaser? This one will keep you guessing...
|
|
#14
|
||||
|
||||
|
Re: How about a REAL teaser? This one will keep you guessing...
I don't think this has anything to do with holonomic drive, or at least the last 2 pictures don't because there are 10 of those big cutout plates. If it had something to do with holonomic drive, wouldn't there be 8, or some other number divisible by 4? Or, maybe they are up against a mirror, or 8 of the plates have something to do with a drive system and the other 2 are just extras. very puzzling indeed...
|
|
#15
|
|||||
|
|||||
|
Re: How about a REAL teaser? This one will keep you guessing...
Quote:
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| pic: Team 306 REAL Teaser #2 | Cody Carey | Robot Showcase | 3 | 06-02-2006 22:58 |
| A few thoughts on Teaser Pics | Josh Hambright | CD Forum Support | 9 | 04-02-2005 17:38 |
| How about a REAL teaser from 968? Any takers? | Travis Covington | Robot Showcase | 21 | 30-01-2005 23:26 |
| Cyber Blue 234 REAL Teaser Video | JAH | Robot Showcase | 7 | 17-02-2004 00:06 |
| What's real, What's better than real... | Excelsior12 | 3D Animation and Competition | 26 | 17-02-2003 20:50 |