Arm mounting on moving tracks?

welderman5000 · #1 09-01-2007, 21:14

When mounting an arm on our robot i came up with a mounting desing for our arm. For maximum flexability, i wanted to mount the arm on a double track sytem. One track alowing the arm to move left to right, and the other track allowing the arm to slide back and forth. Is it legal to use these tracks when mounting the arm?

DonRotolo · #2 09-01-2007, 21:21

See <R48>

eshteyn · #3 09-01-2007, 21:32

In my interpretation of the parts use flowchart, there is nothing stating your tracks are illegal as long as they use motors from that are supplied in the KOP.

fschutzman · #4 09-01-2007, 23:42

What about the track system? There isn't any tracks supplied in the kit of parts.

MrForbes · #5 10-01-2007, 00:16

sure there is....the Bishop Wisecarver track (in the kitbot box) and the BWC bag has the steel wheels (and shoulder bolts) that work with it.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camera tracks backwards	BobC	Programming	7	16-02-2005 10:59
Mounting the arm	Jesse	Technical Discussion	11	10-02-2004 23:20
Odemetry and Tracks	Ryan Cumings	Programming	1	05-02-2004 05:43
Tracks	archiver	2001	2	23-06-2002 22:59
Beatty tracks	JamesJones	Technical Discussion	24	11-04-2002 13:33