Where can i get more sprockets

aviva[x]core · #1 12-01-2007, 22:24

i need to find more sprockets that came with the kit. 24 teeth 1/2 inch thick.

Adam Richards · #2 12-01-2007, 22:29

http://www.chiefdelphi.com/forums/sh...ad.php?t=51472

Please search before you post. The question has likely already been answered at least once.

Note that you will have to drill the holes in most sprockets that you buy. Neither InnovationFIRST nor AndyMark sell the exact same sprockets that are in the kit of parts.

http://andymark.biz/gearssprockets.html

http://www.ifirobotics.com/sprockets.shtml

Justin M. · #3 14-01-2007, 01:26

Quote:

Originally Posted by Adam Richards

http://www.chiefdelphi.com/forums/sh...ad.php?t=51472

Please search before you post. The question has likely already been answered at least once.

Note that you will have to drill the holes in most sprockets that you buy. Neither InnovationFIRST nor AndyMark sell the exact same sprockets that are in the kit of parts.

http://andymark.biz/gearssprockets.html

http://www.ifirobotics.com/sprockets.shtml

IFI sells the aluminum 24t sprockets, which are included in the kit, but aren't aluminum.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
56mm BaneBot Gearbox 15tooth sprockets. Where to buy more?	VEN	Technical Discussion	4	11-01-2007 14:45
Where can I get LabVIEW?	Hershey	LabView and Data Acquisition	1	21-01-2006 14:38
Where can I get sprockets, drive axles, etc.	SPARKY1688	Kit & Additional Hardware	1	13-01-2005 20:59
SPROCKETS WHERE TO GET	tareyton	Technical Discussion	3	23-01-2002 07:40