Camera tracking problem

Windward · #1 15-01-2007, 17:23

I've gotten the camera to work, and it is tracking the target, and everything is connected properly, but every time the camera locks onto the '07 Vision Target, it centers on the light, then tilts upward. It then centers back on the light. This cycle repeats. Should this happen or are one of the parameters incorrect?

JBotAlan · #2 15-01-2007, 17:26

Are you using Kevin Watson's tracking code? You might have the vertical servo reversed; there is a parameter in Kevin's code that will change the sign, reversing the direction of that servo.

Good luck
JBot

Kevin Watson · #3 15-01-2007, 17:59

Quote:

Originally Posted by Windward

I've gotten the camera to work, and it is tracking the target, and everything is connected properly, but every time the camera locks onto the '07 Vision Target, it centers on the light, then tilts upward. It then centers back on the light. This cycle repeats. Should this happen or are one of the parameters incorrect?

See question nine: http://kevin.org/frc/camera/

-Kevin

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camera Tracking Problem	cprogrammer	Programming	1	18-02-2005 15:00
Camera Only Tracking Green	sybert1ger	Programming	2	08-02-2005 20:21
CMU Camera Tracking	auditt241	Programming	0	03-02-2005 16:33
Camera Tracking Woes	VideoMan053	Programming	4	29-01-2005 18:09
Camera Auto Tracking?	Ryan Cumings	Programming	9	22-01-2005 02:20