|
|
|
 If the world was like ChiefDelphi, people would be more eager to help out, offer advice and encourage each other to better things... not a bad world, that. - MissInformation [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Motor mount assembly for drive train?
Hi,
Is there some part in the kit that can be used to mount the motors easily to the chassis? Last year we found a nice bracket in the kit, but this year's kit doesn't seem to have it. /Jason |
|
#2
20-01-2007, 14:06
|
||||
|
||||
|
Re: Motor mount assembly for drive train?
its the banebots transmission part thing if you are using the keyang motors(the big blackonesi think). those are the ones we used.
|
|
#3
20-01-2007, 14:09
|
|||||
|
|||||
|
Re: Motor mount assembly for drive train?
Check out the instructions and drawings under the "documents" heading at http://www.ifirobotics.com/kitbot.shtml
There should be flat plates with holes and slots in them made of 1/8" aluminum in the KOP. Jason |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [ECDU]: Right drive train for this game | Michael Leicht | FIRST-related Organizations | 4 | 03-04-2005 22:31 |
| 3 motor drive train | nuggetsyl | Motors | 25 | 04-02-2005 00:34 |
| Choosing an Encoder for the Drive-train | MikeDubreuil | Electrical | 11 | 21-10-2004 00:50 |
| Motor/Drive Train Workshop: Comments Requested | Jon Lawton | Western Region Robotics Forum | 8 | 12-06-2003 16:32 |
| 4 Motor Drive Train! EEEEK! | Anton Abaya | Motors | 14 | 16-01-2002 09:41 |
Linear Mode
