Power Distrubution Block

[Phil Ross]

has anyone made a drawing or found one, or the new power distrubution block. it would really be appriciated if someone could link me to a site or send me a file.

thank you.

[normanthefatcat]

hey i dont have a drawing but i know the general config of it...so u have a rail with a cross section that looks like this.... --___-- and you have the power distribution blocks (grey black and red) first a gray one goes on then four reds, then another grey then black ones then final gray


so it looks like...
| G | R | R | R | R | G | B | B | B | B | G |
| G | R | R | R | R | G | B | B | B | B | G |
| G | R | R | R | R | G | B | B | B | B | G |
| G | R | R | R | R | G | B | B | B | B | G |
__________________________________ (<= RAIL)

[MrForbes]

try this, it's a pdf

http://literature.rockwellautomation...s001_-en-p.pdf

[Dan Zollman]

I think he meant an Inventor file...

I don't think it's in the Virtual KOP, and it isn't in the FIRST CAD Library. We might just model it ourselves anyway.

[johnnymath360]

201 is currently working on an inventor version of it.... probably going to post sometime in the next week... if you have an Email address I can email directly to you!

[DDAwg3]

when do u think youll have the power distribution block ready like you we really need one. when you have it finished could you please send the inventor file to team549@hotmail.com

[Phil Ross]

it would be great if you could email it to me.

wadidievrdo2u@gmail.com

thanks again.

[Stephi Rae]

if you could also email that to fighterpirate16@hotmail.com, that would be amazing!

[Pnakovich]

Could you also send one to me too, Pnakovich89@aol.com, Thanks.

[babyzeretul]

I am also interested in a CAD of the block.
babyzeretul@gmail.com

[Phoenixseeker]

Yeah if u guys get the new block done in inventor that would be great m.s.lowe@hotmail.com
Thanks

[Dan Zollman]

1712 probably won't model it because it's on the robot and it's too late to take it off..

[geeknerd99]

401 is interested in a CAD/Inventor drawing of the block.
geeknerd99@gmail.com

[Michael Leicht]

come on guys, that block is not hard to make. i had my new kids with inventor make that block and it came out pretty.

[Emperorc]

Well since everyone else thinks its a good idea, I'd like one too, please. My email address is sbcocd04@yahoo.com

Thanks