|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Com Terminal 1 Window Problem.
so i have a bunch of printf's in my code..
however, when you run the IFI loader, load the code and go to view the com terminal window, nothing is displayed there. - everything is connected (ie, lets say im trying to read in a values from a pot, i have the inputs wired correctly and called correctly in the code) - ive checked the printf code and its properly written - a funny thing happens though, if i unplug, then plug back in, the serial port cable into the frc controller in the program port.. the com terminal 1 window will display a "IFI>" on a new line. it will do this every time i unplug, then replug the serial cable into the 'program' port on the controller.. anyone know what may be happening/have encountered something like this/ or have any suggestions? thanks, groovy. |
|
#2
|
|||||
|
|||||
|
Re: Com Terminal 1 Window Problem.
What you describe sounds like the RC isn't running your program. It will give those symptoms if the OI isn't connected. Are you running it tethered, or with the radio link? What do the lights on the RC show?
|
|
#3
|
|||||
|
|||||
|
Re: Com Terminal 1 Window Problem.
I'll also ask the obvious.
Are you using: #include <stdio.h> in every file you have printf's? |
|
#4
|
|||
|
|||
|
Re: Com Terminal 1 Window Problem.
I'd assume he'd have to, or else the program won't compile.
|
|
#5
|
|||||
|
|||||
|
Re: Com Terminal 1 Window Problem.
Actually it can.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Terminal Window | teh_pwnerer795 | Programming | 1 | 02-01-2007 00:21 |
| Terminal Window | Idaman323 | Programming | 0 | 20-02-2006 19:28 |
| SLU-35 Terminal Lugs | Mr.D | Electrical | 2 | 23-01-2006 10:49 |
| Is Terminal Window Evil? | Fat Alex | Programming | 1 | 20-07-2004 10:57 |