AM Two Speed Enhancement

kramarczyk · #1 15-12-2007, 15:37

Just noticed this and thought that others might be interested. AndyMark is now making optional hardware for a 4:1 ratio for it's two speeds. (As opposed to the standard 2.56:1.)

Andy Baker · #2 15-12-2007, 16:18

This enhancement is a response to a conversation Mark Kramarczyk (the originator of this thread) and I had back in November. He was interested in seeing a wider ratio between low and high gears. This was fairly easy to do, since we already have the 28 and 35 tooth gear stock.

Thanks for the suggestion, Mark.

Andy

#3 15-12-2007, 16:21

You know, if you keep making these awesome improvements, my team isn't going to want me to design our own transmissions anymore! Then what am I to fill my time with?

Seriously though, this is pretty sweet. Is there a version of this for the supershifter (because that would be totally awesome)? If there was something to widen the ratio, or to push the low speed a bit lower for the supershifter, I might be convinced to put it onto an Outback system...

kramarczyk · #4 15-12-2007, 16:24

It works for both the gen 2 and the Supershifter.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Are two speed transmissions worth it?	thefro526	Technical Discussion	43	19-04-2007 21:16
pic: my first two-speed	joshsmithers	Extra Discussion	3	26-03-2007 21:49
pic: vex two speed done	colin340	Extra Discussion	7	31-12-2006 19:43
pic: vex two speed	colin340	Extra Discussion	4	29-12-2006 16:32
Two-Speed Chassis	Madison	Technical Discussion	11	13-12-2003 11:41