|
|
|
 Even though others have had success, I will be honest, this method sort of creeps me out. - Joe Johnson [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| Even though others have had success, I will be honest, this method sort of creeps me out. - Joe Johnson [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Team 1710 Needs a part
We are in need of several pulley tensioners that are found on the large CIM Motor's that are no longer allowed to be used in this years competition. Below is a picture of what we need and we are willing to pay shipping to any team that responds to us. Please contact us at ravonics1710@gmail.com for shipping info. We need these ASAP so thank all of you for your help!
 |
|
#2
01-21-2008, 04:51 PM
|
|||||
|
|||||
|
Re: Team 1710 Needs a part
Since the 3" CIM isn't allowed this year, wouldn't the spring and pulley also be non-COTS and not be allowed?
|
|
#3
01-21-2008, 05:00 PM
|
||||
|
||||
|
Re: Team 1710 Needs a part
It's the Motor that's not allowed. The Spring really isn't apart of the motor it's just an addition. Our Drive train this year is belt driven to save weight, these are the best tensioner's we found. I don't see any problems arising. We have 4 of the big CIM Motors, however, we can not seem to find more then one pulley to go along with them. Great organizing on our part.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| NEW TEAM - Pioneer HS Team 1015 in Ann Arbor MI Needs Mentors | kmcclary | General Forum | 17 | 04-10-2012 08:22 AM |
| pic: Team 1710 has a wroking Robot! | FRC1710 | Robot Showcase | 6 | 02-15-2007 12:42 PM |
| Team 67 needs your help! | Beth Sweet | Chairman's Award | 0 | 02-10-2004 06:16 PM |
| A Team needs help! | archiver | 1999 | 2 | 06-23-2002 10:57 PM |
| team 497 needs a part | Andrew Dahl | General Forum | 0 | 02-25-2002 01:22 PM |
(since 2004)
Linear Mode
