|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
IR Board? Both wires or just one?
We were wiring our IR board, when we realized that it said 1 OR 2 goes to positive, and 3 OR 4 for negatives. Then, we saw some other teams using the IR board using BOTH 1 AND 2 for positive, and both 3 AND 4 were in the negative.
My team would just like to know which works, and we don't want to fry our board! |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Two 10AWG wires into one distribution block position | Richard Wallace | Electrical | 7 | 03-02-2008 14:46 |
| Extending IR board connector wires | 7-11number1 | Electrical | 8 | 14-01-2008 21:49 |
| One wheel skate board | EHaskins | Technical Discussion | 4 | 03-04-2007 12:10 |
| BattleCry in Just ONE WEEK! | WernerNYK | Off-Season Events | 43 | 02-07-2006 20:52 |
| Just a thought for the board... | archiver | 1999 | 1 | 23-06-2002 22:03 |