|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#31
|
|||
|
|||
|
Re: I'm back with some advice
I hope there's no big motor changes in the KOP...
|
|
#32
|
|||||
|
|||||
|
Re: I'm back with some advice
I don't think we should read too much into this. It's always brought up around this time of year that teams who want an early start shouldn't do anything expensive or definite. You never know what we'll get come January.
I'm sure it'll be unforgettable. |
|
#33
|
||||
|
||||
|
Re: I'm back with some advice
They change anything they want as long as we can still use four cims.
|
|
#34
|
|||||
|
|||||
|
Re: I'm back with some advice
Why not? I doubt they would switch away from CIM's at this point. Especially with companies like Andymark and Banebots already committing to the CIM for their gearboxes-- but after that, I'm pretty much open to anything.
|
|
#35
|
||||||
|
||||||
|
Re: I'm back with some advice
Quote:
As one of the guys who would be responsible for moving that stuff in and out of the venue, you're right it will never happen. Even if they put it in the game it will never happen. Because it would take a week just to get the stuff in and we don't have the venue for that long. |
|
#36
|
|||||
|
|||||
|
Re: I'm back with some advice
We got along just fine with only 2 CIMs and 2 drills before 2005... Hey, you got a 2-speed tranny in the KOP! (OK, so it was a planetary... and a pain to mount... but still!)
|
|
#37
|
|||
|
|||
|
Re: I'm back with some advice
Quote:
-There will be a 120 lb. High School Class... -Some of the people involved in designing the new Jaguars are battlebots builders. -????? ![]() LOL water game!? HAHAHA! thats rich, I've never heard that one before ![]() |
|
#38
|
||||
|
||||
|
Re: I'm back with some advice
Who can imagine the grin on Dave's face when he wrote this.
|
|
#39
|
|||||
|
|||||
|
Re: I'm back with some advice
I doubt sand and boulders would be used - far too messy. But what if the playing field was somewhat hilly or bumpy or otherwise significantly non-flat, perhaps requiring an actual (gasp!) suspension for the wheels? That would shake things up, and good.
So many teams have a standard drivetrain that they buy the materials for and, 3 days after kickoff, have built already, since it's the umpteenth time they've made one like that. In the words of Inspector Clouseau "not any more". or? Point of order: I did not wish for anything, thank you very much. |
|
#40
|
|||||
|
|||||
|
Re: I'm back with some advice
Quote:
![]() (Favorite corruption in the "Make a wish...and have it horribly corrupted!" thread if someone forgets: Granted, you get nothing!) |
|
#41
|
||||
|
||||
|
Re: I'm back with some advice
I hope this doesn't mean we shouldn't stock up on zip ties....
![]() |
|
#42
|
|||
|
|||
|
Re: I'm back with some advice
Corn.... hmm that reminds me there a bunch of that all over the floor in the loft above our shop and I have no idea why.
As for the zip ties they were not so nice about them at the Seattle Regional (had to take them all off except for wires and replace them with bolts) while at the Portland one they loved them and never broke. |
|
#43
|
|||||
|
|||||
|
Re: I'm back with some advice
What were these zip ties used for? I can see if they were being used to hold the robot together, but it it's simply mounting the electronics and stuff like that, I don't remember any rule against it. (Not saying there couldn't be one in 2009, of course.)
|
|
#44
|
|||||
|
|||||
|
Re: I'm back with some advice
So wait...
Why does the robot base have to move? |
|
#45
|
|||||
|
|||||
|
Re: I'm back with some advice
Extension rules, the last couple of years. Dunno if those'll be back again. (They weren't exactly the most popular ones...)
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| NEED SOME R/C ADVICE | SCHIZOPHRENIA | Technical Discussion | 10 | 18-12-2006 09:39 |
| Some Friendly Advice | Chris Fultz | General Forum | 5 | 08-04-2004 13:43 |
| I'm taking the ACT on Saturday...any advice? | IMDWalrus | Chit-Chat | 9 | 06-02-2004 10:02 |
| Hey I'm Back | Yeslek50 | Chit-Chat | 1 | 08-01-2004 19:15 |
| i need some advice | E Jones 234 | Chit-Chat | 11 | 17-12-2002 17:42 |