CAD files for the new control system

[vivek16]

Does anyone have CAD files (with mounting holes) of the new control system? I mean all of the parts.

thanks, Vivek

Not yet. Maybe next monday when I get back into the Lab I can do some CAD. If I get it done, I'll see about getting it hosted for all.

[naruto137]

That would be awesome!! Thanks!

But wait, I think I saw some of the components already CADed in the introduction guides in the new control system section of USFIRST?

[vivek16]

This is somewhat of a bump post but everyone I've talked to regarding the CAD has asked me to send them a copy if they ever get it.

If anyone has it, it would be appreciated.

thanks, vivek

[Sam N.]

FIRSTbase doesn't have the 2009 KoP released yet.

It says it's coming in January.

Hey guys, really sorry about the delay. Turns out the controls for our team haven't even showed up yet, nor have I had time with finals to make it to the lab. The moment I do get the CAD (and I will...), I'll make sure it gets up here.

Sorry!

[vivek16]

Thanks Craig, we haven't gotten our controls either. Please include the mounting holes.

thanks, Vivek

p.s. Good luck with finals!

Originally Posted by vivek16

Thanks Craig, we haven't gotten our controls either. Please include the mounting holes.

thanks, Vivek

p.s. Good luck with finals!

Thanks! The mounting holes are the most important part of any CAD... Get that wrong, and the model is mostly pointless. Don't worry; once I get the models in my hands they'll be accurate.

[vivek16]

There is CAD of the jaguars here:

http://www.luminarymicro.com/jaguar

thanks, Vivek

[BLAQmx]

NI has consulted with FIRST and we plan to release the CAD drawings of the cRIO-FRC from NI R&D. The drawings will be posted on www.ni.com/FIRST early next week.

Cheers
Mark

NI FIRST Support

[R.C.]

Originally Posted by BLAQmx

NI has consulted with FIRST and we plan to release the CAD drawings of the cRIO-FRC from NI R&D. The drawings will be posted on www.ni.com/FIRST early next week.

Cheers
Mark

NI FIRST Support

Thank you so much!!!

[vivek16]

Will these drawings be just for the cRIO or for all of the other components as well?

thanks, vivek

[vivek16]

Nothing on www.ni.com/first yet.

-Vivek

[FourPenguins]

The CAD files for the cRIO are up (2D and 3D) at the above link. Just go to the "documents" tab.
It seems all we still need are the power distribution/breaker panel and the I/O sidecar. Has anyone found these?
EDIT: This document has pictures and schematics: http://usfirst.org/uploadedFiles/3-FRC%20Control%20System-Component-Datasheets-Rev-0-5a.pdf.

[BLAQmx]

CAD drawings are now posted on www.ni.com/FIRST


CAD Drawings for the cRIO-FRC


-Mark