Team 40 cRio Setup Workshop Sunday 1/11/09

[Kingofl337]

Team 40 will be holding a cRio Setup workshop on 1/11/09.

- Unboxing the cRio
- Connection the Modules and Wiring
- Testing the OTB Code
- Configuring the Access Point and Gaming Adapter
- Installing LabView and Windriver
- Installing Labview and Windriver Updates
- Flashing the cRio and Driver Station
- Configuring the Axis Camera
- Deploying both the Windriver and LabView Code to the cRio

Whats needed:
We recommend bringing the complete Control System KOP box. We also recommend you have the battery cables preWired to the Power Distribution Panel. We also recommend at least two batteries.

If you have your system connected to a robot and only the OTB code loaded
you can bring the robot and blocks.

Location:
Intelitek
444 East Industrial Park Drive
Manchester NH 03109

Maximum of Two People per team, preferably a mentor and a student.
Maximum of 15 Teams

If you would like to come please e-mail: checkmate40@gmail.com

edit: It would be really cool if there was a category somewhere on team workshops so this type of post doesn't get lost.