Stupid but important question with the axis camara

zackcool123 · #1 18-01-2009, 19:48

I am having a problem connecting and viewing to the axis camara on a browser when it is pluged in to port 2 on the Crio. Any help

Bongle · #2 18-01-2009, 19:52

Quote:

Originally Posted by zackcool123

I am having a problem connecting and viewing to the axis camara on a browser when it is pluged in to port 2 on the Crio. Any help

The camera is on a separate network when it is plugged into the cRIO, you cannot view it from your computer. The best you can do is set up a live feed in LabView or WindRiver (I don't know how to do it, but search for it) where the cRIO compresses the image as a JPG then forwards it to your computer.

zackcool123 · #3 18-01-2009, 19:58

thanks

jmanela · #4 18-01-2009, 21:16

just use the tutorial that they give you in the NI FIRST community site

techsupport07 · #5 19-01-2009, 12:08

you cannot view the camera when it is plugged into the cRIO. the camera and your computer will be on different subnets...therefore you will not be able to see it. to make sure it is working, connect the camera directly to your compuer via ethernet port and set your computers NIC to a static IP and make sure it is on the same subnet as the camera.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Axis Camera responding in the Vision Assistant but not in WindRiver	DanDon	C/C++	3	11-01-2009 12:50
hey, stupid question but...	fallen751	Programming	16	24-01-2007 17:49
Dumb (but important to me) Question!	cdennisxlx2	Programming	4	23-03-2006 14:18
Stupid question but...	Adam Y.	Math and Science	6	16-02-2004 19:29
ill probably feel stupid but i do anyway so...	Anthony Kesich	Programming	8	05-11-2003 12:53