|
|
|
 Incidentally, this is a good example of why lawyering the FIRST rules is good practice for the real world. By critically analyzing FIRST's errors, you practice for the day when you need to critically analyze legislators' errors (and deliberate trickery). - Tristan Lall [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Can't change team # (was: Driver Station problem)
Our driver station won't let us change our team number when we hold down the down arrow.
Any help would be appreciated. 
|
|
#2
03-02-2009, 16:18
|
|||||
|
|||||
|
Re: Can't change team # (was: Driver Station problem)
What software revision does the Driver Station screen display?
If you see the letters "OTB", you're still running the Out of The Box firmware, which does not implement the ability to set the team number. You'll need to update both the Driver Station and the cRIO, using the procedures found in the Control System Manual (http://www.usfirst.org/frccontrolsystem).
|
|
#3
03-02-2009, 16:26
|
||||
|
||||
|
Re: Can't change team # (was: Driver Station problem)
ok thanks, that explains a lot, it still is OTB, because we don't have internet at our meeting place. but I downloaded the update today so then we will be able to get it then, thanks you so much.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Driver station problem | team2491 | FRC Control System | 7 | 31-01-2009 00:18 |
| Problem Downloading Program from WindRiver to Driver Station | The_Laughing_ManMII | C/C++ | 10 | 09-01-2009 20:03 |
| Driver Station not allowing team number change | Bryan Herbst | FRC Control System | 2 | 04-01-2009 12:26 |
| Driver Station Blank Screen, Anyone have the same problem? | LDavies562 | FRC Control System | 14 | 22-12-2008 19:34 |
| bug: Can't change team number to Team 0 | Joe Ross | CD Forum Support | 1 | 18-12-2003 09:52 |
Hybrid Mode
