|
|
|
 Mentors learn from, are inspired by, and emulate each other. A team with a great lead mentor leads to a productive, inspired, and ultimately successful group of mentors. - Jared Russell [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools |
Rating: 
|
Display Modes |
|
|
|
#1
|
|||||
|
|||||
|
[FTC]: TETRIX Omni Wheels
Does anyone have one of these on hand? The description on the website parts.ftcrobots.com says these are 3" in diameter.
The CAD models I have for the omniwheels and for the regular 3" wheel, however, are of differing diameters. Both models are from 3dcontentcentral.com. Can someone verify that each of these 3" wheels are of different diameters? Are the CAD models incorrect? 
|
|
#2
09-10-2009, 16:08
|
||||||
|
||||||
|
Re: [FTC]: TETRIX Omni Wheels
Madison,
I can't help you here... but just out of curiosity, what diameters are the wheels you have? Andy
|
|
#3
09-10-2009, 16:49
|
|||||
|
|||||
|
Re: [FTC]: TETRIX Omni Wheels
I don't have any of the parts in front of me; only CAD models.
The regular 3" wheel (http://parts.ftcrobots.com/store/det...0&l= 0&bhcp=1) measures 2.85" at its largest diameter. The omniwheel (http://parts.ftcrobots.com/store/det...69&c=0&t=0&l=0) measures 3.063" to the outside of the rollers.
|
|
#4
09-10-2009, 21:17
|
||||
|
||||
|
Re: [FTC]: TETRIX Omni Wheels
The omni wheels are slightly bigger than the regular wheels for some reason. I think they took the diameter of the white part is what they took as 3 inches or something around those lines. The rollers make it slightly bigger than the regular wheels which has caused a problem with my design. I recommend experimenting with placements just to see how things work out.
Hope this helps Andrew 1902
|
|
#5
15-10-2009, 22:26
|
|||
|
|||
|
Re: [FTC]: TETRIX Omni Wheels
Madison,
I would be happy to change the model on 3DContentCentral.com - just let me know. Marie
|
|
#6
26-03-2011, 13:44
|
|||
|
|||
|
Re: [FTC]: TETRIX Omni Wheels
Marie, I've been looking all over for a 4" Omni Wheel model in SolidWorks, and I can't find them. Is there any way you could post them on 3DCC if you have them on hand? Thanks in advance.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [FTC]: Anyone new to FTC or TETRIX, READ THIS NOW! | PhilBot | FIRST Tech Challenge | 21 | 04-12-2009 17:34 |
| [FTC]: FVC (Vex) VS. FTC (Tetrix) | jbbjjbt | FIRST Tech Challenge | 79 | 24-09-2009 12:39 |
| [FTC]: VRC (VEX) AND FTC (Tetrix) | jbbjjbt | FIRST Tech Challenge | 1 | 21-09-2009 14:59 |
| [FTC]: FTC Tetrix Extra Parts | Team 288 | FIRST Tech Challenge | 2 | 22-10-2008 18:30 |
| [FTC]: Rookie Team Needs Help With Tetrix FTC Kit! | rjustice4 | FIRST Tech Challenge | 8 | 05-10-2008 09:44 |
Hybrid Mode
