2010 Denso WIN motor specs

[Jonnadiah]

Hey,

Does anyone have the full specs for this year's Denso WIN motors? We're having a heck of a time finding them.

Thanks in advance.

[bmusser]

I have these specs from 2007.

[DaLolzReaper]

Hi team 612 is looking for connectors from the Denso motors. We need connectors so that we can attach gears to the motors.

[Dad1279]

Originally Posted by DaLolzReaper

Hi team 612 is looking for connectors from the Denso motors. We need connectors so that we can attach gears to the motors.

4 couplers came in the kit this year.

[Teched3]

Here is a link to a spreadsheet for all the FIRST motors in the kit. CIMs are listed first, but you can pull down a menu to select a different motor in B13, and a new curve will appear.

http://www.chiefdelphi.com/media/papers/2320?

Hope this helps.

[DaLolzReaper]

Thank you,
We have found the connectors.

[trilogy2826]

Originally Posted by DaLolzReaper

Thank you,
We have found the connectors.

Can you help the rest of us out and tell us where you procured the connectors?

[matt 1923]

please?

[chris janney]

hey is anyone else using the denso motors to lift their robot? if so, what gears are you using and where can I get some at?

[JamesCH95]

You might want to think about using a CIM motor to lift, the denso motors are good for 13watts or so while the CIM motor is good for almost 200watts.

[kevinb999]

Where in the KoP are the connectors? I cannot find them in the check list!

[Lafleur]

any one know where to find the connectors for the denso motors?? or the part number?

tom@lafleur.us

Originally Posted by trilogy2826

Can you help the rest of us out and tell us where you procured the connectors?

[sanddrag]

I found it elsewhere on this forum. I haven't ordered these myself, so I'm not sure if it is correct. Here is what someone else referenced:

Connector housing - Mouser p/n 829-12129487 - Delphi p/n 12129487
Connector seal - Mouser p/n 829-15300020 - Delphi p/n 15300020
Terminal (14ga) - Mouser p/n 829-12110845 - Delphi p/n 12110845-L

There are several different terminals available, for different wire gauges:
http://connectors.delphi.com/DCSGDMC...=Y&vE xact=0&