3-axis Joystick

[Ether]

Has anyone used this Joystick yet with the 2010 FRC LabVIEW?

http://www.newegg.com/Product/Produc...-014-_-Product

Is there a better 3-axis Joystick out there for a similar price?


~

[qwertyuiop[]\]

you can probably find a logitech 3 axis joystick at microcenter or whatever your local computer electronics store is and save on shipping.
http://www.logitech.com/index.cfm/ga...s/291&cl=us,en
we bought one the other day and the quality seems pretty good, although we have not yet hooked it up and tested it. also this joystick is made by the same company as the KOP joysticks are. Also if your going to use the joystick for mechanum drive, extra buttons are just going to be a nuisance for your driver but thats my opinion.

[Ether]

Originally Posted by qwertyuiop[]\

you can probably find a logitech 3 axis joystick at microcenter or whatever your local computer electronics store is and save on shipping.
http://www.logitech.com/index.cfm/ga...s/291&cl=us,en
we bought one the other day and the quality seems pretty good, although we have not yet hooked it up and tested it.

Does the FRC 2010 LabVIEW installation have built-in support for this joystick? Our programming team is brand-new this year and I don't want to throw too many curve balls at them.

Thanks.


~

[jhersh]

I know the Logitech 3D joystick works great. The thrustmaster one probably does, but I haven't tested it.

Any USB joystick that is either HID compliant or for which you have installed DirectInput drivers for will work with the Driver Station.

-Joe

[Ether]

Originally Posted by jhersh

I know the Logitech 3D joystick works great
...
Any USB joystick that is either HID compliant or for which you have installed DirectInput drivers for will work with the Driver Station.

-Joe

Are you using this joystick with LabVIEW?


~

[jhersh]

Originally Posted by Ether

Are you using this joystick with LabVIEW?

Yes.

[Ether]

Originally Posted by jhersh

Yes.

Does the 2010 FRC LabVIEW installation come with built-in support for the Logitech 3-axis joystick? If not, are the modifications straightforward for a novice?

Thank you.


~

[jhersh]

Originally Posted by Ether

Does the 2010 FRC LabVIEW installation come with built-in support for the Logitech 3-axis joystick? If not, are the modifications straightforward for a novice?

It's supported out of the box. It supports up to 6 axes on each joystick.

-Joe

[dmitch]

I know that the Logitech 3D works great with LabView. Me and the other programmer on my team got it working great with the Holonomic Drive and the Mecanums.