|
|
|
 Sustaining an FRC team is really hard! - Jared Russell [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| Sustaining an FRC team is really hard! - Jared Russell [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Getting Started With Wireless
Our robot is working with tether, but we are trying to get wireless working. We started with what the manual told us to in Chapter 2 of the Benchtop Test, but that didn't work. When we went to the bridge's IP, it didn't find anything. Do we need to install the router's CD onto the Clamshell? We tried but it didn't work. Thank you!
|
|
#2
30-01-2010, 16:53
|
|||
|
|||
|
Re: Getting Started With Wireless
We're able to download code to a robot wirelessly from any laptop with WindRiver and all the updates. All we did was switch the IP address of the wireless card to 10.xx.yy.z (xx and yy being team number, see manual - Z being a valid IP range). Then just connect to the router and connect to the remote target.
|
|
#3
30-01-2010, 17:00
|
||||
|
||||
|
Re: Getting Started With Wireless
Thanks, we got it now!
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Getting started with CAN/Jaguar | CVassos | Programming | 1 | 27-01-2010 23:43 |
| Help Getting Started with VEX programming. | Joe Johnson | VEX | 5 | 16-04-2007 09:01 |
| Problem getting started with USB 6009 | JimGRobot | LabView and Data Acquisition | 1 | 18-12-2006 09:15 |
| Getting Started with Scripting | LBK Rules | Programming | 2 | 15-01-2005 01:28 |
Linear Mode
