Cypress First Touch

scottbot95 · #1 11-02-2010, 20:35

We have programmed the PSoC with the PSoC Programmer but the Driver Station won't recognize its existance.

I saw a post somewhere were someone had the same problem, if you could direct me towards that thread or answer on mine that would be great.

Mark McLeod · #2 11-02-2010, 23:43

Do you mean you downloaded the FRC firmware, or do you mean you wrote your own program and downloaded that?

I only ask because for Driver Station use requires the FRC firmware.

There is an issue that requires us to uninstall the Cypress s/w and reinstall it.
That can be done using the Driver Station Update.

scottbot95 · #3 15-02-2010, 22:14

Thanks for your help. we did that a third time and it worked

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cypress board	bls0620	Electrical	4	17-01-2010 23:22
Cypress Board Configuration	Geek 2.0	FRC Control System	12	17-01-2010 04:23
Cypress IO board connect	SteveD	FRC Control System	12	16-01-2010 16:46
Cypress soc?	sp33chy	FRC Control System	2	15-01-2010 08:58
get in touch with the members of the First Program	lil devil	Chit-Chat	30	23-03-2002 22:50