Driver/Operator Control Board

umangv620 · #1 20-02-2010, 17:12

I'm not sure if this is the right category to put this in, but...
On the board where the Joysticks and the Classmate are supposed to be attached, the area where the Driver and Operator will drive and operate the robot, are we going to connect to the robot wirelessly or are we going to be using an ethernet connection at competitions?

Basically I am asking if I should have our router mounted on the board or not.

I don't know what that board is called, so i was not able to search for it.

Joe Ross · #2 20-02-2010, 17:55

See <R58>, <R84>, and <R87>

umangv620 · #3 20-02-2010, 18:21

So the router is allowed, but if the classmate is going to be connected to the arena ethernet cable, wouldn't the router on the wireless bridge be useless?

Joe Ross · #4 20-02-2010, 19:47

Quote:

Originally Posted by umangv620

So the router is allowed

That's not how I read <R87>.

umangv620 · #5 20-02-2010, 19:56

Quote:

Originally Posted by Joe Ross

That's not how I read <R87>.

oh i thought it said that the router and the stop button was not included in the KoP(which i thought was weird).

Thanks for the clarification!

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pic: 1138 Driver Control Board	Jeff K.	Robot Showcase	3	24-02-2006 02:37
Operator interface/Driver Control board	sgsdragons	Robot Showcase	4	07-03-2005 08:58
Lights in Joystick board or control board	rcubes85	Control System	15	26-02-2005 23:40
Operator Board Size Limitations??	archiver	2001	6	24-06-2002 00:37
operator interface board	archiver	2001	4	24-06-2002 00:33