|
Adding a PWM/Jag causes a -63195 error
We have a robot with 8 motors and they all work. We added a 9th PWM and when we do we get an -63195 error. Digitial interface is in Slot 4 and we've tried both ports 9 and 10 on the digitial sidecar.
Google searching didn't return anything of use. A CD search came up with a team that was having general comm problems, which is not our issue.
Another team reported problems with power to the digital side car. The other motors on the DSC work, so I don't think it's a power issue.
We did a reinstall of the firmware with no positive results.
I'm looking for any good ideas on what to try next.
Thanks!
__________________
Foster - VEX Delaware - 17 teams -- Chief Roboteer STEMRobotics.org
2010 - Mentor of the Year - VEX Clean Sweep World Championship
2006-2016, a decade of doing VEX, time really flies while having fun
Downingtown Area Robotics Web site and VEXMen Team Site come see what we can do for you.
|
Based on EXTENSIVE analysis of this image, I have concluded that we will have to use wires on our robots. I am certain of it. - theCADguy [more] 
Similar Threads
Threaded Mode