Runtime Error

Rangel(kf7fdb) · #1 27-07-2010, 19:28

Hey I have a runtime error when I try to run a program.

Alan Anderson · #2 27-07-2010, 21:24

Yes, that's when one would expect a runtime error to occur.

On a serious note, you need to give a whole lot more detail before anyone will have a chance of giving useful advice. What program? What operating system? What kind of computer? And of prime importance: what is the error?

Rangel(kf7fdb) · #3 28-07-2010, 13:26

We are using Labview. We have re imaged the crio and all the updates are good. We are using windows xp on a dell that we have programmed in labview in the past. We dont know what kind of error it is but when we try to run a program a window pop ups saying a runtime error is closing labview in an unusual way.

jhersh · #4 28-07-2010, 14:07

Quote:

Originally Posted by Rangel(kf7fdb)

We are using Labview. We have re imaged the crio and all the updates are good. We are using windows xp on a dell that we have programmed in labview in the past. We dont know what kind of error it is but when we try to run a program a window pop ups saying a runtime error is closing labview in an unusual way.

If you see it again, please take a screenshot of the error message (using Alt-PrtScn) and post it here.

Thanks
-Joe

Rangel(kf7fdb) · #5 28-07-2010, 15:30

Here is the error message.

Rangel(kf7fdb) · #6 28-07-2010, 16:13

By the way, we change all our ips to 843 because we were using a practice bot.

Bot190 · #7 28-07-2010, 16:29

Quote:

Originally Posted by Rangel(kf7fdb)

By the way, we change all our ips to 843 because we were using a practice bot.

I assume you mean 10.8.43.* by this. Everyone on the same network must have a different ip, other wise problems will occur. What program are you running? are you running something on the robot when this happens?

Rangel(kf7fdb) · #8 28-07-2010, 16:32

A template called 2010 Game Robot Project and we have not done anything on it.

Rangel(kf7fdb) · #9 28-07-2010, 17:35

never mind, got it working

Vikesrock · #10 28-07-2010, 18:13

For the benefit of others would you mind posting what you changed that caused the error to go away?

Rangel(kf7fdb) · #11 10-08-2010, 10:28

We just uninstalled everything and reinstalled it. We think it may have just installed incorrectly or something.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
runtime data collection	Ether	Programming	14	09-04-2010 23:37
How to avoid error 1920 service net runtime optimization service v2 0.50215 _x86	Linda_Ol	Lego Mindstorm Discussion	3	28-07-2009 11:11
Blinking RC and Runtime Errors	jamie_1930	General Forum	4	23-04-2009 09:53
stupid Array error: Error [1300] stack frame too l	Validius	Programming	7	27-01-2006 10:53
VEX Battery Pack Runtime?	TennBikeBerk	FIRST Tech Challenge	4	04-08-2005 18:12